Plugin

Changelog

A full record of every release, what changed, what was fixed, and what was added.

Latest version: 1.0.15
1.0.15
November 9, 2026
Latest
Fixed The "Bypass: POST requests" edge rule checked the query string instead of the request method, so it never matched. It now uses Request Method and shows as Request Method, Match any, POST in your Bunny dashboard.
Improved The same rule now also covers PUT, PATCH and DELETE requests. Your edge rules update automatically after updating, and only this one rule changes.
1.0.14
November 5, 2026
New Second pull zone support, for sites whose www and non-www addresses are on separate Bunny pull zones. Pick the second zone in Settings or set WPBC_PULL_ZONE_ID_2 in wp-config.php. Both zones get the same edge rules from one deploy, and every purge clears both.
New The settings screen tells you whether you need a second zone: it points out the zone that serves your other hostname, or confirms your main zone already serves both.
Fixed On sites whose address starts with www, edge rules never matched the non-www address, so bypass and cache rules did not apply to visitors who used it. Rules now match both, whichever one your site uses.
Improved Much lower server load after updates. Every update used to empty the whole CDN right away, and a dashboard update arrives as several requests, so a site could be purged up to 10 times in a few minutes and rebuild every page each time. Now each site is purged once, a minute after its last update, and sites on the same server take turns over 5 minutes.
Improved Updates to admin-only plugins, such as MainWP Child, ManageWP Worker, WP Umbrella, UpdraftPlus and this plugin, no longer purge the CDN at all.
Improved A gentler cache warmer: one page at a time, at most two sites warming at once on the same server, and it waits while the server is busy. The sitemap is read at most every 6 hours instead of after every purge.
Internal pull_zone_id_2 added to the wpbc_status and wpbc_bunny_connection filters for other plugins. New filters: wpbc_update_purge_delay, wpbc_no_purge_plugin_folders, wpbc_server_warm_slots, wpbc_load_threshold and wpbc_cpu_cores.
1.0.13
November 3, 2026
Latest
Fixed Sites could go down for up to 10 minutes after a theme update from MainWP or another management dashboard, then come back on their own. Bunny cuts off any request after 60 seconds, and large theme updates often take longer, so the update stopped half way and left WordPress’s maintenance page up. Updates from MainWP, ManageWP, InfiniteWP, WP Umbrella, Modular DS, Watchful and UpdraftCentral now always finish.
New The MainWP Dashboard card warns when child sites still go through their CDN instead of connecting directly, since long updates to those sites are reported as failed after 60 seconds.
1.0.12
October 26, 2026
Latest
Fixed CPU spikes during bulk updates. Every edge rule deploy used to delete all of a site’s rules and create them again, 200 to 300 Bunny API calls even when nothing had changed, and a bulk update ran that on every site in the same minute.
Improved Deploys now send only what changed. A redeploy with nothing new costs a single API call, and rules are updated in place, so a site is never left without them.
Improved Bulk updates are spread out. Updates pushed from a dashboard, by WordPress auto-updates or WP-CLI give each site its own slot of up to 5 minutes, and at most two sites on one server deploy at once. Updates you click in a site’s own admin still deploy straight away.
New Support for ManageWP, InfiniteWP, WP Umbrella, Modular DS, Watchful and UpdraftCentral. Once the service has verified a request, its dashboard IP is trusted in Bunny Shield, and long updates are never cut short or sent twice.
New Remote management login links and WP Umbrella requests are never cached, so a dashboard’s data can never be served to visitors.
New WP Umbrella’s login protection now sees visitors’ real IPs behind Bunny, and Bunny is purged whenever WP Umbrella clears caches.
New A Remote management card on the Integrations tab shows each service and the IPs it is trusted from.
Fixed The plugin could not load on PHP 8.0 or 8.1, its stated minimum. It now runs on every PHP version from 8.0 up.
1.0.11
October 25, 2026
Latest
New Strict-Transport-Security and a Content-Security-Policy are now set at the edge alongside the existing headers, so your site carries all six headers securityheaders.com grades on. The policy only restricts framing and plugins (WordPress needs inline scripts); the wpbc_security_headers filter lets you supply your own. The deprecated X-XSS-Protection header is no longer sent.
1.0.10
October 25, 2026
Latest
Fixed CPU spikes and an "edge rules update pending" notice that never cleared. If an automatic deploy ended with one failed rule, the plugin retried a full deploy every time WP-Cron ran, which on client sites is every MainWP sync. Retries now back off from 5 minutes to daily, and the notice names the rule that failed and why.
New MainWP integration. Slow syncs and child sites that showed as disconnected came from the CDN sitting between the dashboard and the child: Bunny Shield inspecting the dashboard's requests, and Bunny's origin timeout, which is capped at 60 seconds and by default re-sends a timed-out request. Both are now handled on each side.
New Child sites learn the dashboard's IP from its own requests and add it to the Bunny Shield trusted-IP rule automatically, which is what MainWP asks for on every firewall and CDN. The detected IP is shown on the Integrations tab.
New The dashboard can connect to child sites' origin servers directly, skipping their CDN: no WAF, no 60-second limit, no retries. Child sites running this plugin report their origin during sync; each origin is checked before use and re-checked weekly, and sites whose origin cannot be reached keep using the CDN. Per-site status on the Integrations tab, with a Settings toggle.
Improved On MainWP sites the pull zone waits the maximum 60 seconds for the origin and no longer re-sends a timed-out request, so a long update or sync is never run twice.
Improved Edge rules after a plugin update are now always the new version's. The background deploy clears the plugin from PHP's cache first and only runs on the updated code, retrying shortly if the server has not caught up yet.
Improved The Integrations tab now shows MainWP status, and on the dashboard recommends a real server cron for scheduled syncs and a child request timeout of at least 300 seconds.
1.0.9
October 17, 2026
Latest
Fixed The settings page could open with no data and tabs that did nothing. Automatic edge rule deploys saved Purge Log entries in a different format, and the Purge Log tab crashed on them, stopping the page before its script loaded. All log entries now use one format, existing entries are read correctly, and a bad entry can no longer break the page.
Fixed The Purge button, WP-CLI and the REST purge endpoint now report the actual purge result instead of reading the newest log entry, which could belong to a different event.
Fixed The last purge time reported to other plugins now always means the last full purge, not the latest log entry.
1.0.8
October 17, 2026
New Edge protection for the plugin's own admin files. Bunny Optimizer is turned off for them, and Bunny Shield is turned off for them for logged-in admins only, so the CDN can never block or alter the settings page script.
Improved Settings page tabs are now real links. You can bookmark a tab, a reload keeps you on the same tab, and the tabs still work if the page script is unavailable.
New Diagnostic banner: if the settings page script cannot start, the page now says why and offers a Redeploy edge rules button that works without JavaScript.
Fixed "Deploy now" links in update notices opened the Stats tab instead of Edge Rules.
1.0.7
October 16, 2026
Latest
New Support for client-side media processing in WordPress 7.1. The block editor now resizes and converts images in your browser, using about 13 MB of WebAssembly code. Bunny Shield could block those files, and Bunny Optimizer could try to re-minify them, so image uploads failed unless client-side processing was turned off. Both are now handled automatically.
New Bunny Optimizer is turned off for the media processing files, which are already minified. Bunny Shield is turned off for them only for logged-in admins and editors, so visitors are still fully protected.
Improved Both rules follow your existing admin switches in the Edge Rules tab, so they are added even if you have picked specific rules. They are only deployed on WordPress 7.1 and later.
1.0.6
October 16, 2026
Fixed With Bunny Shield active, the Bricks code element could show "Could not load code editor". The code editor is a large script that contains PHP keyword lists, which WAF rules can flag. When Bricks is the active theme, the admin Shield bypass now also covers the builder and its editor files, for logged-in admins and editors only. Visitors are still fully protected.
1.0.5
October 16, 2026
New Works with Nahnu Login Shield, our free login security plugin. Login Shield locks out brute-force attackers and can push their IPs to the Bunny.net WAF, so they are blocked at the CDN edge before they reach your server. It now appears at the top of the Integrations tab, showing whether it is active on the site, with a one-click install.
Security The Shield/WAF bypass cookie could be forged. Its value was always 1 and edge rules 2 and 3 only matched the cookie name, so any request carrying wpbc_role=1 had Shield and the WAF switched off for /wp-admin/* and /wp-json/*. The cookie now carries a per-site secret and both edge rules match that exact value. After updating, edge rules redeploy automatically within 5 minutes.
Security Default WAF bypass roles changed from all logged-in users to Administrator + Editor. Sites that explicitly selected roles keep their selection.
New Rotate bypass secret button in Settings. Generates a new secret, redeploys edge rules, and re-issues the cookie. Logged-in users are refreshed automatically on their next page load, no re-login needed.
Improved Edge rules redeploy automatically the moment the plugin is updated, reinstalled (same or new version) or activated. The update starts a short background request that loads the new plugin code and deploys the new rules, so no visitor or WP-Cron run is needed. If the host blocks that request, a fallback runs 60 seconds later.
Improved Manual deploys always take priority. Click Deploy at any time: a running automatic deploy hands over straight away, and any automatic deploy still pending skips itself because the rules are already current.
Improved Plugin updates through MainWP and other remote managers now finish quickly. Automatic purges are combined into one Bunny API call at the end of the request, after local cache plugins finish clearing, and cache warmer sitemap fetching and Perma-Cache cleanup moved to WP-Cron.
Improved Setup no longer needs page reloads. A newly pasted API key is tested and saved straight away instead of reporting "not set", the pull zone list fills in automatically, Shield zone lookup works before saving, and the Shield events section appears as soon as a Shield zone is found.
Fixed Deploy failed with "Order index must be unique" for rules split into batches, such as static asset caching. Every rule now gets its own position in the intended order, and rules you created yourself in the Bunny dashboard keep theirs.
Fixed Third-party cache bypass URLs (wpbc_cache_bypass_urls) were deployed after the Cache HTML rule, so Bunny ignored them and paths such as a custom login URL could be cached for the full TTL. The rule now deploys before Cache HTML.
Fixed Every automatic purge hit the Bunny API twice because the purge action had two listeners.
Fixed With specific rules selected in the Edge Rules tab, rules split into batches only deployed their first batch.
Fixed Background deploys (cron, auto-deploy, WP-CLI, REST) ignored the TTL saved in the Edge Rules tab and reset it to 7 days.
Fixed Two edge rule deploys could overlap (for example the automatic deploy and the admin button) and delete each other's rules. Deploys now run one at a time.
Fixed If a second copy of the plugin ended up in another folder, activating it caused warnings and a fatal error. The extra copy now stands down and shows a notice naming the folder to remove, and deleting it no longer erases the shared settings.
New For developers: wpbc_bunny_connection filter so other plugins can reuse the Bunny connection instead of asking for the API key twice, and shield_zone_id added to wpbc_status. New wpbc_deploy_bypass_urls action redeploys only the third-party bypass rules, and wpbc_mark_rules_stale flags rules for the 5-minute check to redeploy.
1.0.4
October 1, 2026
New xSpeed Cache — cache purge sync via xspeed_after_purge_all (full purge).
1.0.3
September 9, 2026
Latest
New Groundwork for automatic edge rule management. A periodic cron check detects when deployed rules are out of date and redeploys automatically. Full zero-touch rule management is being built out across upcoming releases.
New Edge rules auto-deploy when a supported ecommerce, membership, LMS, or booking plugin is activated or deactivated.
New Admin notice after plugin updates shows whether a rule update is pending or needs manual action, with a last deployed timestamp and a Deploy now button.
New WP-CLI commands: wp bunny deploy, wp bunny purge, wp bunny status, wp bunny rules. Deploy and purge across all client sites via SSH without touching the admin.
New Public PHP API for third-party plugin integration. Seven hooks including wpbc_is_connected, wpbc_status, wpbc_purge_all, wpbc_purge_url, and wpbc_deploy.
New REST API endpoints under /wp-json/wpbc/v1/ for external integrations. Authenticated via X-WPBC-Token header. Includes status, purge, purge-url, and deploy endpoints.
New API documentation tab in the plugin admin with all endpoints, filters, actions, and copy-paste code examples.
Security Full security audit of all new code. REST token verified with hash_equals to prevent timing attacks. All inputs sanitized, all output escaped.
Internal This release begins a move toward fully automatic WAF rule management. The goal is that site owners never need to think about deploying rules. Future releases will continue expanding this.
1.0.2
September 8, 2026
Fixed WordPress.org was serving an incorrect version due to a mismatched stable tag. Corrected with this release.
Improved Shield WAF event log panel redesigned with a proper table layout, sticky headers, scrollable area, and colour-coded action badges.
1.0.1
September 8, 2026
New Vary Cache by Accept-Language — automatically configured on the pull zone when WPML, Polylang, or TranslatePress is active, so each language gets its own CDN cache entry.
New Shield WAF event log panel on the Stats tab. Enter your Shield Zone ID in Settings to view blocked IPs, triggered rules, and URLs for the last 1, 6, 24, or 72 hours.
New Request Coalescing toggle in Settings. When enabled, Bunny combines simultaneous requests for the same uncached resource into a single origin fetch.
New Admin notice after plugin updates prompting you to redeploy edge rules. Dismissible per version with a direct link to the Edge Rules tab.
Internal Tested up to WordPress 7.1.
1.0.0.5
August 24, 2026
New wpbc_shield_bypass_ips filter — third-party plugins can add trusted IPs and CIDR ranges to the Bunny Shield WAF bypass list without any changes to this plugin.
New wpbc_shield_bypass_urls filter — third-party plugins can disable Bunny Shield WAF inspection on specific URL path patterns. Deploys as rule 75 when in use.
New wpbc_cache_bypass_urls filter — third-party plugins can add URL paths to the Bunny CDN cache bypass list. Deploys as rule 76 when in use.
New wpbc_compatible_plugins filter — third-party plugins can register themselves in the Integrations tab with their own name, company, and compatibility note.
1.0.0.4
August 18, 2026
Fixed Plugin settings (API key, pull zone) could be wiped during plugin updates, option imports, or multisite operations. Added a sanitize guard that aborts if the incoming data does not look like a real Settings form submission.
Security Added a pre_update_option filter as a second line of defence — if anything tries to overwrite a configured API key with an empty value, the write is silently blocked and the existing configuration is preserved.
1.0.0.3
August 15, 2026
Fixed Bunny edge cache now always purges when a cache plugin is updated, regardless of the "Plugin / theme updates" trigger setting. Previously the purge was skipped if that toggle was off.
1.0.0.2
July 18, 2026
New BerqWP — cache purge sync via berqwp_flush_all_cache and berqwp_purge_cdn (full purge) and berqwp_flush_page_cache (per-URL).
1.0.0.1
July 10, 2026
New SWIS Performance by EWWW Image Optimizer — cache purge sync via swis_complete_cache_cleared and swis_site_cache_cleared (full purge) and swis_cache_by_url_cleared (per-URL).
Internal Tested up to WordPress 7.0.1.
1.0.0
July 1, 2026
New Initial public release on WordPress.org.
New 74 Bunny.net pull zone edge rules across 9 categories: Core WordPress, HTML Caching, Ecommerce, Membership, LMS, Booking and Events, Static and Performance, Security Headers, and WAF / Trusted IPs.
New One-click deploy and redeploy via Bunny.net API. Rules are tracked by GUID and updated in place on redeploy, no duplicates created.
New Cache purge sync for 15 WordPress cache plugins including WP Rocket, LiteSpeed Cache, W3 Total Cache, FlyingPress, and more.
New Automatic bypass rule detection for 6 ecommerce platforms, 13 membership plugins, 9 LMS plugins, 4 booking and events plugins, 5 multilingual plugins, and 8 SEO plugins.
New Cache warmer with automatic sitemap detection across 8 supported SEO plugins and WordPress core sitemaps.
New Trusted IP / WAF whitelist support, auto-batched across up to 5 IPs or CIDRs per rule.
New Debug logging for purge trigger events, configurable in Settings.
Internal Plugin does not connect to any Nahnu Plugins server. All outbound connections go directly from the WordPress installation to the user's own Bunny.net API.

This website uses cookies to enhance your browsing experience and ensure the site functions properly. By continuing to use this site, you acknowledge and accept our use of cookies.

Accept All Accept Required Only